09/12/2014 - AX2065P/SW215P - Presets for PC260

The following presets for processing AX2065P/SW215P systems with PC260 are provided (see AX2065P User's Manual for additional information).

STANDARD PRESET (name: 2065_4+1_ST01.pcf)
This PRESET is suitable for vertical flown arrays that may range from 4 to 8 boxes or for the centre region of a bigger fl own array. It can be used also for stacked arrays.
NOTE: in this preset the subwoofer SW215P is placed at the top of the flown array, in case the sub is placed on ground an additional delay time must be considered.

LONG THROW PRESET (name: 2065_4+1_LT01.pcf)
This PRESET can be used in arrays bigger than 6 or 8 boxes and loaded in the top 1 or 2 boxes in order to obtain a more even distribution of the sound pressure, especially if they point very far away or to the upper deck of a large theatre.

SINGLE/DOWN-FILL PRESET (name: 2065_4+1_SD01.pcf)
This PRESET, which features a much smoother high frequency response, can be loaded in the bottom boxes (usually 1 or 2 boxes) of a large flown array, in order to reach conveniently the audience close to the stage. It
can be used also for the conventional system consisting 1x SW215P at ground and 2x AX2065P on pole.
This preset could be very useful also when the box is used just on its own as a Front Fill element in the front of very large stages.
